输气管道声波法泄漏检测技术的理论与实验研究Theoretical study and experimental study on leak detection for natural gas pipelines based on acoustic method
刘翠伟;李玉星;王武昌;刘光晓;
摘要:
为探究输气管道声波法泄漏检测技术的基本原理和研究方法,建立了输气管道泄漏仿真模型和实验模型。首先,研究输气管道发生泄漏时声波产生机理,从而明确声波法泄漏检测技术的工作原理;其次根据声波法泄漏检测的原理建立Fluent仿真模型,通过CFD软件模拟输气管道泄漏得到流场和声场,得到声波信号特征;再次根据声波法泄漏检测的原理搭建实验管道,设计完成声波信号数据采集终端,并在仿真结果指导下完成输气管道泄漏检测实验,采集得到实验数据并进行分析,得到泄漏时声波信号特征并对仿真结果进行验证;最后对比多工况条件下的实验结果和仿真结果,分析不同工况条件对压力波动值的影响规律,从而总结输气管道声波法泄漏检测的仿真与实验研究方法,为声波法泄漏检测的实际工程应用提供理论基础。研究结果表明:输气管道泄漏产生的声波来源于泄漏时气体不稳定流动产生的偶极子声源和四极子声源;仿真模拟和实验研究的方法都可以完成声波法泄漏检测技术的研究,可以对声波法泄漏检测技术的推广和工程应用提供强大的理论支持和可行性保证。结论是:声波法泄漏检测技术可以很好的检测输气管道泄漏,是一种灵敏度高,检测时间短,值得推广的方法。
关键词:
基金项目: 国家自然基金(51104175);; 中央高校基本科研业务费专项资金(11CX06075A)资助项目
通讯作者:
Email:
参考文献:
- 1李玉星,彭红伟,唐建峰等.天然气长输管道泄漏检测方案对比.天然气工业,2008;28(9):101-104
- 2 Watanabe Kajiro,Matsukawa Shun,Yukawa Hitoshi et al. Detection and location of a leak in a gas-transport pipeline by a new acoustic method.AIChE Journal,1986:32(10): 1690-1702
- 3王朝晖,张来斌,辛若家等.声发射技术在管道泄漏检测中的应用.中国石油大学学报(自然科学版),2007;31(5):87-90
- 4文玉梅,由原,杨进等.固定干扰源存在下的管道泄漏检测和准确定位.声学学报,2013;28(1):80-84
- 5杨向莲.天然气管道泄漏检测技术评价及预防措施.能源技术, 2005;26(6):250
- 6 Muggleton J M,Brennan M J,Pinnington R J.Wave number prediction of waves in buried pipes for water leak detection. Journal of Sound and Vibration,2002:249(5): 939-954
- 7 Muggletona J M,Brennana M J,Linford P W.Axisymmetric wave propagation in fluid-filled pipes:wave number measurements in invacuo and buried pipes.Journal of Sound and Vibration,2004:270:171-190
- 8刘敬喜,李天匀,刘土光,李强.弹性介质中充液管道的波衰减特性,华中科技大学学报(自然科学版),2003;31(10)
- 9 Lighthill M J.On sound generated aerodyna ically I.General theory.In:Proc.R.Soc,Lond.,1952:211(1107): 564-587
- 10 Curie N.The influence of solid boundaries on aerodynamic sound.In:Proc.Roy.,London Soc,1955:231(1187): 505-514
- 11 Ffowcs Williams J E,Hawkings D L.Sound generation by turbulence and surfaces in arbitrary motion.In:Proc. Roy.Soc.London,1969:264(1151):321-342
- 12 Powell A.Theory of vortex sound.J.Acoust.Soc.Am., 1964:36:177-195
- 13李玉星,唐建峰,王武昌等.输气管道声波泄漏检测试验装置的设计与构建.实验技术与管理,2010;27(8):63-67